UNIMA CABLE | DATA & COMMUNICATION CABLES
Cat 6 SF/UTP PVC – Shielded Ethernet Cable
High-performance 4-pair Category 6 data cable with solid copper conductors, combined foil and braid screening, and a UV-resistant PVC outer jacket.
CAT 6250 MHz4 PairsAWG 23SF/UTP100 Ω
Product Overview
Cat 6 SF/UTP PVC is a shielded data and LAN cable for structured cabling and Ethernet communication networks.
Four twisted pairs of solid copper conductors are insulated with solid polyethylene and arranged around a star-shaped separator. The overall screening combines aluminium/polyester foil, a drain wire and tinned copper braid to help reduce electromagnetic interference.
The grey UV-resistant PVC jacket provides mechanical protection. The cable is specified for Gigabit Ethernet and data transmission up to 250 MHz.
Key Technical Features
250 MHzFrequency Range
100 ΩNominal Impedance
4 PairsSolid Copper AWG 23
7.2 mmApprox. Outer Diameter
Construction & Technical Properties
Cable Construction
ConductorElectrolytic Solid Copper
Conductor SizeAWG 23
InsulationSolid Polyethylene
Arrangement4 Twisted Pairs
SeparatorStar-Shaped
ScreenAl/PET Foil + Tinned Copper Braid
Drain WireIncluded
Outer JacketUV-Resistant PVC, Grey
Electrical & Mechanical Data
Conductor ResistanceMax. 94 Ω/km at 20°C
Insulation Resistance5000 MΩ/km
Mutual CapacitanceMax. 56 nF/km
Characteristic Impedance100 Ω ±15%
Propagation Velocity67–69%
Operating Voltage250 V DC
Test Voltage1200 V
Operating Temperature-20°C to +60°C
Bending Radius8 × Outer Diameter
Typical Applications
Structured LAN Cabling
Gigabit Ethernet Networks
Office & Commercial Networks
Industrial Data Communication
Network Infrastructure
Power over Ethernet Applications
Applicable Standards
ANSI/TIA-568-C.2 – Balanced twisted-pair cabling.
IEC 61156-5 – Symmetrical pair cables.
IEC 11801 – Generic cabling.
IEC 60332-1-2 – Flame propagation test.
EN 60332-1-2 – Flame propagation test.
IEC 61156-5 – Symmetrical pair cables.
IEC 11801 – Generic cabling.
IEC 60332-1-2 – Flame propagation test.
EN 60332-1-2 – Flame propagation test.
Technical Notice: UV-resistant jacket does not automatically establish suitability for direct burial or all outdoor installation conditions. Confirm installation requirements, CPR classification and any project-specific PoE requirements before selection.
Technical Data & Cable Dimensions
Cat 6 SF/UTP PVC | 4 Pairs | AWG 23 | 250 MHz
4Twisted Pairs
23 AWGSolid Copper
7.2 mmOuter Diameter
58 kg/kmCable Weight
Available Cable Configuration
| Configuration | AWG | Outer Ø mm | Copper kg/km | Cable kg/km | Pakiranje m |
|---|---|---|---|---|---|
| 4 × 2 × AWG 23 | 23 | 7.2 | 25.6 | 58 | 500 / 1000 |
Transmission Performance
| Frequency MHz |
Insertion Loss Max. dB/100m |
NEXT Min. dB |
PSNEXT Min. dB |
ELFEXT Min. dB/100m |
PSELFEXT Min. dB/100m |
Return Loss Min. dB |
|---|---|---|---|---|---|---|
| 1 | 2 | 74.3 | 72.3 | 67.8 | 64.8 | 20 |
| 4 | 3.8 | 65.3 | 63.3 | 55.8 | 52.8 | 23 |
| 8 | 5.3 | 60.8 | 58.8 | 49.7 | 46.7 | 24.5 |
| 10 | 6 | 59.3 | 57.3 | 47.8 | 44.8 | 25 |
| 16 | 7.6 | 56.2 | 54.2 | 43.7 | 40.7 | 25 |
| 20 | 8.5 | 54.8 | 52.8 | 41.8 | 38.8 | 24.3 |
| 25 | 9.5 | 53.3 | 51.3 | 39.8 | 36.8 | 23.6 |
| 31.25 | 10.7 | 51.9 | 49.9 | 37.9 | 34.9 | 21.5 |
| 62.5 | 15.4 | 47.4 | 45.4 | 31.9 | 28.9 | 20.1 |
| 100 | 19.8 | 44.3 | 42.3 | 27.8 | 24.8 | 18 |
| 200 | 29 | 39.8 | 37.8 | 21.8 | 18.8 | 17.3 |
| 250 | 32.8 | 38.3 | 36.3 | 19.8 | 16.8 | 16.8 |
Showing 12 of 12 frequencies | Manufacturer reference data
Technical notes: Transmission performance values correspond to the manufacturer's reference table. Insertion loss is the maximum permitted value; crosstalk and return loss figures are minimum values. Cable dimensions and weights are approximate.







