Cat. 7 S/FTP Data Cable

Naziv tvrtke

Poslovni e-mail

Cross Section

Required Quantity

Željeni rok isporuke

Additional Requirements

Armoured Cables: 2 Kablovi

Instalacijski kablovi: 5 Properties

Upravljački kabeli: 1 Kablovi

Komunikacijski i podatkovni kabeli: 1 Kablovi

Fire Performance Cables: 1 Kablovi

Fleksibilni vodiči: 2 Kablovi

Solar: 1 Kablovi

Energetski kablovi 1 - 30 kV: 10 Properties

Tehnički podaci

Cat. 7 S/FTP
Tip kabela

Data Networks, LAN, Industrial Ethernet, Data Centers, Smart Buildings
Područje primjene

ISO/IEC 11801 | EN 50173 | IEC 61156-5
Standard

Detaljnije

Izolacijski materijal Foam PE
Pakiranje 100 m Coil |305 m Easy Pull Box |500 m & 1000 m Drum
Dostupnost Stock

Available Jacket Colours: Grey | Blue | Orange | Black
Minimalni radijus savijanja: 8 × Cable Diameter
Operating Temperature: -20°C to +75°C
Flame Performance: IEC 60332-1

Materijal vodiča Solid Bare Copper (Class 1)
Grupa kabela Komunikacijski i podatkovni kabeli
Izolacijski materijal Foam PE
Radni napon 72 V
CPR razred Eca (LSZH versions available up to Cca)
Standard ISO/IEC 11801 | EN 50173 | IEC 61156-5

The Cat. 7 S/FTP cable is a high-performance 4-pair data cable designed for structured Class F networks and high-speed voice and data transmission. Each twisted pair is individually screened with aluminium-laminated foil, while the complete cable is protected by a tinned copper braid for enhanced electromagnetic interference protection.

CAT. 7 S/FTP · DATA CABLE

Cat. 7 S/FTP Data Cable

Cat. 7 S/FTP is a high-performance 4-pair data cable designed for structured Class F networks and high-speed voice and data transmission. Each twisted pair is individually screened with aluminium-laminated foil, while the complete cable is protected by a tinned copper braid.

Designed for transmission frequencies up to 600 MHz and suitable for primary, secondary and horizontal structured cabling. Supports high-speed network applications including Gigabit Ethernet and 10 Gigabit Ethernet.

Cat. 7 Category

S/FTP Screening

4 Pairs Configuration

600 MHz Frequency

AWG23 Conductor

Construction

Solid Cu / Foamskin PE / PiMF / Tinned Cu Braid / LSHF

Conductor

Solid bare copper conductor, Ø 0.56 mm, AWG23

Insulation

Foamskin polyethylene (PE), Ø 1.35–1.45 mm

Pair Construction

Two insulated conductors twisted into each pair

Pair Screen

Aluminium-laminated plastic foil around each pair

Overall Screen

Tinned copper wire braid, minimum 40% coverage

Outer Sheath

Halogen-free LSHF / LSOH / FRNC compound

Outer Diameter

7.3–8.0 mm

Sheath Colour

Orange

Technical Data

Electrical and transmission characteristics

Characteristic Impedance 1–100 MHz 100 ± 5 Ω

Characteristic Impedance 100–250 MHz 100 ± 10 Ω

Characteristic Impedance 250–600 MHz 100 ± 15 Ω

Maximum DC Loop Resistance 165 Ω/km

Insulation Resistance at 500 V ≥ 2000 MΩ·km

Capacitance at 800 Hz 43 nF/km

Velocity Factor 0.79

Maximum Propagation Delay 427 ns/100 m

Maximum Delay Skew 12 ns/100 m

Test Voltage 1000 V DC / 1 min.

Maximum Tensile Force 110 N

Operating Temperature -20°C to +60°C

Installation Temperature 0°C to +50°C

Minimum Bending Radius – Fixed 4 × D

Minimum Bending Radius – Installation 8 × D

Standards

Applicable data cable standards

ISO/IEC 11801 Generic structured cabling

IEC 61156-5 Data cable specification

EN 50173 Information technology cabling

EN 50288-4-1 Multi-element metallic data cables

Applications

Class F structured cabling systems

10 Gigabit Ethernet Supports IEEE 802.3an 10GBASE-T network applications.

Gigabit Ethernet Suitable for IEEE 802.3ab 1000BASE-T networks.

Structured Cabling For primary, secondary and horizontal Class F cabling.

Data Centres High-performance screened cabling for demanding data networks.

Commercial Buildings Suitable for high-speed building data and voice networks.

Industrial Networks Screened construction provides enhanced EMI protection.

CAT. 7 · S/FTP · 4 × 2 × AWG23 Designed for Class F structured networks with transmission frequencies up to 600 MHz. Each pair is individually foil screened and the complete cable is protected by an overall tinned copper braid.

Nominal Transmission Characteristics

Values at 20°C

Frequency MHz	Attenuation dB/100m	NEXT dB	PS-NEXT dB	ACR dB/100m	PS-ACR dB/100m	ELFEXT dB/100m	PS-ELFEXT dB/100m	Return Loss dB
1	1.8	100	97	98	95	105	105	—
4	3.4	100	97	97	94	105	102	27
10	5.4	100	97	95	92	97	94	30
16	6.8	100	97	93	90	93	90	30
20	7.7	100	97	92	89	91	88	30
31.2	9.6	100	97	90	87	87	84	30
62.5	13.7	100	97	86	83	81	78	30
100	17.4	100	97	83	80	77	74	30
125	19.5	95	92	75	72	75	72	26
155.5	21.9	94	91	72	69	73	70	26
175	23.3	93	90	70	67	72	69	25
200	25.0	92	89	67	64	71	68	25
250	28.1	90	87	62	59	69	66	24
300	30.9	89	86	58	55	67	64	24
450	38.3	87	84	48	45	64	61	23
600	44.8	85	82	40	37	61	58	22
750	52.0	83	80	31	28	59	56	21
900	59.4	82	79	23	20	58	55	20
1000	63.1	80	77	17	14	57	54	20